Description
Extreme compatible (10056 10056H 1G-SFP-BXD) 1.25G, BiDi SFP, TX1490nm / RX1310nm, 20KM Transceiver, LC Connector for SMF with DOM | Plusoptic BISFP-D-20-EXT Plusoptic’s BISFP-D-20-EXT Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1310nm FP laser (the 1490nm DFB laser) and the PIN photo-detector. The module data link up to 20KM in 9/125um single mode fibre. The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access. FEATURES Up to 1.25Gb/s data links FP laser transmitter for BIDI–SFP-U-20KM-PLU DFB laser transmitter for BIDI–SFP-D-20KM-PLU PIN photo-detector Up to 20KM on 9/125µm SMF Hot-pluggable SFP footprint BIDI LC/UPC type pluggable optical interface Low power dissipation Metal enclosure, for lower EMI RoHS compliant and lead-free Single +3.3V power supply Support Digital Diagnostic Monitoring interface Compliant with SFF-8472 Case operating temperature Commercial: 0°C to +70°C APPLICATIONS Switch to Switch Interface Gigabit Ethernet Switched Backplane Applications Router/Server Interface Other Optical Links WARRANTY3-years limited warrantyTAA-approved SFPs available upon request, Contact us for more details.
